Technical characteristics
1.4-20mA output/0-10V output/RS485 output+relay output;
2.The current signal is converted into an RS485 signal output to achieve the conversion and output of analog and digital quantities;
3.Output signals and switch signals can be collected on the display, and external alarm lights can be connected for alarm or switch signals can be provided to PLC and other equipment;
4.The relay can set alarm values, delay, return difference, upper and lower limits, etc. according to specific needs;
5.The range and decimal point can be adjusted arbitrarily, and can be displayed according to actual values or percentages;
6.3.0 inch wide LCD display and 0.56 inch high brightness digital tube display are optional, with a clear reading of 8 meters;
7.Sunproof mirror surface, which does not affect observation data under direct sunlight;
8.Explosion proof level Exd II CT6 Gb/Ex ia II CT6 Ga;
9.Protection level IP65/IP66/IP67.
Product parameters
Working power supply |
24VDC/220VAC |
Unit |
℃,℉,Kpa,Mpa,Bar,%,m,A,mA |
Input signal |
4-20mA |
Output signal |
4-20ma/0-10v//RS485+Two relays |
Measurement accuracy |
±0.2%FS±1 word |
Sampling rate |
3 times/second |
Power consumption of the entire machine |
≤200mA |
Display Range |
-1999~9999 |
Humidity range |
≤85%RH |
Display method |
0.56-inch digital/3.0-inch LCD display |
Working temperature |
-40~60℃ |
Shell material |
Cast aluminum |
Dimensional drawing
Introduction to Wiring Methods
1.Connect the inputs and outputs for power supply:
2.Connect the input and output power supply plus a single relay:
3.Connect the input and output power supply plus dual relays:
Installation method
System Principles